technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 1 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni features ? p-lcc-2 package. ? high flux output. ? optical indicator. ? colorless clear window. ideal for backlight and light pipe application. ? inter reflector. ? suitable for automatic placement equipment. ? suitable for reflow and wave solder processes. ? av ? ailable on tape and reel (12mm tape). pb ? -free. the product itself will remain within rohs ? compliant version. descriptions ? the 67-23b series is available in so ft orange, green, blue and yellow. due to the package design, the led has wide viewing angle and optimized light coupling by inter refl ector. this feature makes the ideal for light pipe application. the low current requirement makes this device ideal for portable equipment or any other applicati on where power is at a premium. applications ? amusement equipment. ? information boards. ? flashlight for digital camera of cellular phone. ? telecommunication: indicator and b acklighting in telephone and fax. ? flat backlight for lcd?s, switches and symbols. ? light pipe application. ? general use. device selection guide chip material emitted color resin color ingan white water clear
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 2 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni package dimensions 0.750.1 1.80.2 + 2.70.1 2.40.1 3 1.91.5 1.6 1.8 0.7 0.75 3.250.2 1 4 2 - -- for reflow soldering(propose) note: the tolerances unless mentioned is 0.1mm; unit = mm
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 3 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni absolute maximum ratings (ta=25 ) *1 parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 110 mw electrostatic discharge esd 2000 v operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. * 1. the value are based on 1 die performance electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. units condition luminous intensity *1 i v 1600 -- 2850 mcd i f =20ma *2 viewing angle *2 2 1/2 -- 60 -- deg i f =20ma *2 forward voltage *2 v f -- -- 3.95 v i f =20ma *2 reverse current *2 i r -- -- 50 a v r =5v *1. when three led dies are operated simultaneously. *2. for each die. note: 1.tolerance of lu minous intensity: 11% 2.tolerance of forward voltage: 0.1v
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 4 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni bin range of chromaticity coordinates *1 i f =20ma bin code cie_x cie_y bin code cie_x cie_y 0.2800 0.2480 0.2960 0.2760 0.2640 0.2670 0.2870 0.2950 0.2830 0.3050 0.3070 0.3150 a0 0.2960 0.2760 b5 0.3110 0.2940 0.2870 0.2950 0.3110 0.2940 0.2830 0.3050 0.3070 0.3150 0.3040 0.3300 0.3300 0.3390 b3 0.3070 0.3150 b6 0.3300 0.3180 0.3070 0.3150 0.3300 0.3180 0.3040 0.3300 0.3300 0.3600 0.3300 0.3600 0.3610 0.3850 b4 0.3300 0.3390 c0 0.3560 0.3510 *1. when three led dies are operated simultaneously. notes: tolerance of chromaticity coordinates 0.01 the c.i.e. 1931 chromaticity diagram 0.26 0.28 0.30 0.32 0.34 0.36 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 y x b6 c0 b5 b4 a0 b3
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 5 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni typical electro-optical characteristics curves 10 forward voltage v -(volts) f 2.6 0 10 relative luminous intensity (%) ambient temperature t (c -60 1 10 -20 -40 0 20 60 40 ) a 100 80 100 1000 ambient temperature ambient temperature t (c a ) 0 forward current derating curve 10 forward current 0 20 30 i (ma) 50 40 f 80 40 20 60 100 1 ta=25c wavelength (nm) 100 1000 forward current 10 20 i (ma) 30 50 40 f spectrum distribution radiation diagram ta=25c forward current 0 1 10 2 10 i (ma) f 3 10 ta=25c relative luminous intensity vs. ta=25c f = 1 k h z d u t y = 1 / 1 0 forward current 3.8 3.0 2.8 3.4 4.2 forward current vs. forward voltage relative luminous intensity vs. relative luminous intensity (%) relative luminous intensity (%) 400 500 600 700 0 25 100 800 50 75 0.7 0.8 0.9 1.0 0.4 0.5 0.3 0.2 0.1 0.6 80 90 50 60 70 40 0 10 20 30
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 6 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni label explanation cat: luminous intensity rank hue: chromaticity coordinates ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm; unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 7 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni carrier tape dimensions: loaded quantity 500 pcs per reel. + polarity - - - note: the tolerances unless mentioned is 0.1mm; unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 8 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 9 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: th e led's floor life is 1 year unde r 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent mate rial (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be perf ormed using the following conditions. baking treatment : 605 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260c. max. 10 sec. max. 1~5 c / sec. 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put st ress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
technical data sheet top leds with lens 67-23butc/tr8 everlight electronics co., ltd. http://www.eve rlight.com rev. 1 page: 10 of 10 device no: dse-0000956 prepared date: 25-feb.-20098 prepared by: giles ni 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the so ldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful becau se the damage of the product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have been soldered. when repa iring is unavoidable, a double-head soldering iron should be used (as be low figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com
|
